Jeremy dropped off his Silvia Conversion S13 for us to repair and replace his damaged front end.

The damaged front end is coming off to make way for the front end Jeremy purchased from JGY

Damaged front end gone

The replacement front end is on

New front end is on and finished:

Jeremy's GT2871R

Jeremy's car on the dyno before going under the knife

12.6 in the quarter

Jeremy's car is on the lift to get his upgrades

Tomei Technical Trax 1.5way LSD

Tomei Technical Trax is ready to be installed

You can see the Tomei side by side with the factory LSD

Installed the Tomei into the factory casing

Fastbrakes Wilwood 11inch 4piston brake kit

Installing his 11inch Wilwood front brake kit

Passenger side shown with a 4piston caliper

Driver side looking great

Refurbished rear diff and axles with the Tomei LSD installed and ready to go into the car

Installing rear adjustable camber arms

His JWT tuned ECU is ready to be plugged into the harness

This is probably the last shot of his stock setup before upgrades

His new Garrett GT2871r with the .64 a/r rated at 390HP

His tubular T2 flanged manifold will look nice holding the power making turbo

Engine bay with all of the factory turbo components removed and waiting for the upgrade.

Jeremy's old T25 and stock manifold.

Turbo mounted to equal length manifold

Actuator set to 10psi base

All factory lines installed onto his new GT2871r

Turbo and manifold now installed into the engine bay

JGY fuel rail and injectors are now installed

Making intake to turbo

Intake finished, complete with 300zx MAF and AEM filter installed

Wired up the OBD1 port to work so that vital parameters can be monitored (seen here being monitored by our Greddy Informeter)

Fuel pump removed

Found and fixed the wiring

Added a secondary power source for his fuel pump

Verified his idling fuel pressure with a new gauge

Installed Jeremy's adjustable Godspeed rear camber arms

Replaced some worn out wheel studs

Another view of the Wilwood brakes from outside

Freshly installed Greddy Racing Lug Nuts

Had to apply some custom color matched JGY stickers

Waiting to be shipped back to the happy owner